![]() In Windows, right-click on the computer icon on the bottom right of your screen. You can manually assign a local IP address to your computer so it is in the same network as the switch. Remember to follow these steps again to change the IP address of your computer back to using DHCP once you are done with configurations on the switch, before you connect back into the existing network. For more information on this subnets, read through IP Addressing and Subnetting for New Users. In the unlikely scenario that you have a static IP address configured on your switch, you would need to be in the same subnet as the static IP. The last octet, represented with an x in 192.168.1.x can be any number 2-253. Since the switch IP address is set for the default of 192.168.1.254, you will have to go into your computer and set a static IP address that is in that same subnet in order to connect. If this occurs, you need to make sure that your network is on the same subnet as your switch while you are doing configurations. If you don’t have a connection to the switch, you won’t see the Web UI and you will most likely receive an error code. Many networks use a 192.168.1.x LAN subnet, but not all do. These addresses are only visible inside a local area network, between devices, and are considered private from outside networks. Typically in a LAN, the router uses DHCP to assign each device its own unique internal IP address. ![]() Everyone connected to the LAN is in the same physical location. If you have followed the steps, but have not gotten access to the Web UI, you may be on a different Local Area Network (LAN) subnet than the switch.Ī LAN might be as big as several buildings or as small as a home. Running into issues? Try these troubleshooting tips! If you are not seeing a login screen, check out the Troubleshooting Tips section below. This should open the Web UI, first displaying the log in screen. ![]() Step 2Įnter 192.168.1.254, or the static IP address if configured, and click Enter on your keyboard. Start typing in the name of the application and select it when listed as an option. If you do not see the web browser you wish to use, you can access it at the bottom left search bar on a Windows computer. Now that you know the IP address of the switch, you can access the Web UI. This is not recommended as there may be conflicting configurations which may create issues in your existing network. If you set a static IP address of the switch, you could enter that IP address instead of the default.This will reset the switch to default settings and the default IP address of 192.168.1.254. If you can not remember the IP address or you do not have a special configuration, use an open paperclip to press the reset button on your switch for at least 10 seconds while it is powered on. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |